Encapsulation Type Encapsulation type of the packets By default, it is LLC.
Zte Zxhn H108N Firmware Version 8.0 License Between ZTEExcept as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein.Intended Audience This document is intended for: Network planning engineers Installation debugging engineers On-site maintenance engineers System maintenance engineers.
This declaration is issued based on our current level of knowledge. Since conditions of use are outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no liability in connection with the use of this information. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Zte Zxhn H108N Firmware Version 8.0 Manuals And OnPay attention to all the cautions in the user manuals and on the product. The ZXHN H108N provides four 10100Base-T Ethernet user interfaces and the wireless access function that complies with the IEEE 802.11bgn standard. However, perform the steps above at the first time. Check the TCPIP settings. If pinging the device fails, verify the following: The Ethernet cable between the ZXHN H108N device and the computer is not correctly connected. Prerequisite Before logging in to the ZXHN H108N device, make sure that. Click Login. The default home window is displayed, see Figure 2. On the left navigation tree, click to perform the corresponding configurations. Figure 2 Home Page Note: The Web configuration pages may vary with the software versions. On the main page of the ZXHN H108N, select StatusUser Interface to view the User Interface Information, including WLAN, Etherent, and USB. On the navigation tree, click Quick Setup to open the Quick Setup page as show in Figure Figure 3 Quick Setup Table 3 describes the parameters for quick setup. Table 3 The parameters for quick setup Parameter Description New Connection Name. IP Version The IP version includes: IPv4 IPv6 IPv4v6 IP Type There are three IP types: Static DHCP IPoA. Prefix Delegation for Allocation Enable the Prefix Delegation for Allocation Address. Address 2. Passphrase WPA Range: 8 64 characters Encryption Algorithm WPA There are three options: TKIP:Temporal Key Integrity Protocol AES: Advanced Encryption Standard TKIPAES: Adaptive encryption algorithm WEP Encryption EnableDisable WEP Encryption. The WAN connection configuration page is displayed, see Figure. Table 6 Parameters for Creating a New WAN Connection Parameter Description Connection Name The default is Create WAN Connection. Before creating a new connection, make sure the Create WAN Connection option is selected. This should be consistent with the port configuration on the NE.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |